CRC32的原理介绍以及查表法实现和多项式相除实现

1、CRC32的生成多项式

?多项式系数提取出来，改写位16进制数为：0x104C11DB7，如果转换为33个二进制数[1, 0, 0, 0, 0, 0, 1, 0, 0, 1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, 1,
? ? ? ?1, 0, 1, 1, 0, 1, 1, 0, 1, 1, 1] ，那么从左到右对应于生成多项式的每个项目的系数（0或1）。

2 ?CRC32校验码的生成：

? ? 如果待校验的数据写成多项式的形式，也就是把数据先转换为二进制的数，然后每个二进制数对应一个多项式的一个系数；比如待校验的数据是0x85，那么对应二进制[1000 0101],对应多项式：，把这个多项式再乘以，然后再除以G(x)，最终的余数就是CRC校验码，也就是（）*/G(x)的余数。

3?CRC32校验码完整流程介绍：

1. Invert bits on each byte，如果输入是多个字节的数据，每个字节的对应二进制数字要逆序排列，字节之间还是保持输入顺序；
2. 经过上面处理的数据，需要在末尾增加0x00000000四个字节；相当于给输入数据的多项式乘以
3. xor first four bytes with 0xFF (this is to avoid errors on the leading 0s)，经过上面步骤处理后输入数据的前四个字节要和0xFFFFFFFF异或。如果输入数据不足4个字节，也没关系，因为步骤2末尾增加0x00000000四个字节，总长度是够4个字节的。
4. Compute the reminder ，上面步骤生成的数据对应的多项式除以生成多项式G(x)后的余数
5. Reverse the bits again，余数是4个字节，这4个字节对应的二进制数字要按一个整体逆序排列。
6. xor the result again. 逆序后的4个字节再和0xFFFFFFFF异或，得到最终的CRC校验值。

上面步骤中，输入数据的逆序，余数的逆序，输入数据和0xFFFFFFFF的异或，以及余数和0xFFFFFFFF的异或，都是可选步骤，根据不同的应用，可能会有不同的选择。

CRC（循环冗余校验）在线计算_ip33.com

4 举例：

calculate the CRC-32 hash for the 'ANSI' string 'abc':

inputs:
dividend: binary for 'abc': 0b011000010110001001100011 = 0x616263
polynomial: 0b100000100110000010001110110110111 = 0x104C11DB7

start with the 3 bytes 'abc':
61 62 63 (as hex)
01100001 01100010 01100011 (as bin)

reverse the bits in each byte:
10000110 01000110 11000110

append 32 0 bits:
10000110010001101100011000000000000000000000000000000000

XOR (exclusive or) the first 4 bytes with 0xFFFFFFFF:
(i.e. flip the first 32 bits:)
01111001101110010011100111111111000000000000000000000000

next we will perform 'CRC division':

a simple description of 'CRC division':
we put a 33-bit box around the start of a binary number,
start of process:
if the first bit is 1, we XOR the number with the polynomial,
if the first bit is 0, we do nothing,
we then move the 33-bit box right by 1 bit,
if we have reached the end of the number,
then the 33-bit box contains the 'remainder',
otherwise we go back to 'start of process'

note: every time we perform a XOR, the number begins with a 1 bit,
and the polynomial always begins with a 1 bit,
1 XORed with 1 gives 0, so the resulting number will always begin with a 0 bit

'CRC division':
'divide' by the polynomial 0x104C11DB7:
01111001101110010011100111111111000000000000000000000000
 100000100110000010001110110110111
 ---------------------------------
  111000100010010111111010010010110
  100000100110000010001110110110111
  ---------------------------------
   110000001000101011101001001000010
   100000100110000010001110110110111
   ---------------------------------
    100001011101010011001111111101010
    100000100110000010001110110110111
    ---------------------------------
         111101101000100000100101110100000
         100000100110000010001110110110111
         ---------------------------------
          111010011101000101010110000101110
          100000100110000010001110110110111
          ---------------------------------
           110101110110001110110001100110010
           100000100110000010001110110110111
           ---------------------------------
            101010100000011001111110100001010
            100000100110000010001110110110111
            ---------------------------------
              101000011001101111000001011110100
              100000100110000010001110110110111
              ---------------------------------
                100011111110110100111110100001100
                100000100110000010001110110110111
                ---------------------------------
                    110110001101101100000101110110000
                    100000100110000010001110110110111
                    ---------------------------------
                     101101010111011100010110000001110
                     100000100110000010001110110110111
                     ---------------------------------
                       110111000101111001100011011100100
                       100000100110000010001110110110111
                       ---------------------------------
                        10111100011111011101101101010011

we obtain the 32-bit remainder:
0b10111100011111011101101101010011 = 0xBC7DDB53

note: the remainder is a 32-bit number, it may start with a 1 bit or a 0 bit

XOR the remainder with 0xFFFFFFFF:
(i.e. flip the 32 bits:)
0b01000011100000100010010010101100 = 0x438224AC

reverse bits:
bit-reverse the 4 bytes (32 bits), treating them as one entity:
(e.g. 'abcdefgh ijklmnop qrstuvwx yzABCDEF'
to 'FEDCBAzy xwvutsrq ponmlkji hgfedcba':)
0b00110101001001000100000111000010 = 0x352441C2

thus the CRC-32 hash for the 'ANSI' string 'abc' is: 0x352441C2

5 查表法计算原理：

1. ?输入数据是多个字节，可以按照逐个字节的方式去计算CRC检验值
2. 首先要对0-255这256个数字，计算每个数字对应的CRC检验值，形成一个表格，可以用0-255来索引校验值
3. 对于第一个输入字节，首先进行逆序，然后逆序后取值作为索引去查表，获得校验值，得到校验值是4个字节，那么按照多项式的除法步骤，校验值4个字节的开头一个字节需要和第二个输入字节（逆序处理后的）进行二进制加法，也就是异或，然后用这个异或后的值作为索引去查表，得到新的校验值，然后再和下一个字节进行相同的处理，以此类推，直至所有输入数据处理完。
4. 最后得到的4个字节校验值，进行整体逆序，然后和0xFFFFFFFF异或，得到最终的CRC32校验值。

6 ?多项式相除方法和查表方法的python代码：

mport numpy as np


hex_num = "104C11DB7" # 要转换的十六进制数字
binary_num = bin(int(hex_num, 16))[2:] # 将十六进制转换为十进制再转换为二进制
print("二进制结果：", binary_num)
crc32_gen = np.array(list(binary_num), dtype=int)
print(crc32_gen)



# 使用np.pad()函数进行补零操作

myCRC32Table = np.zeros(0,dtype=int)

for j in range(256):
    Bytes = bin(j)[2:]
    Bytes_bin_array = np.array(list(Bytes), dtype=int)
    Padded_Bytes_bin_array = np.pad(Bytes_bin_array,(0, 32), mode='constant')
    #print("\n补零后的数组:\n", Padded_Bytes_bin_array)
    
    for i in range(len(Padded_Bytes_bin_array)-33+1) :
        tmp_value = Padded_Bytes_bin_array[i:i+33]
        #print(tmp_value)
        if tmp_value[0] ==0:
            continue
        else:
            Padded_Bytes_bin_array[i:i+33] =  tmp_value ^   crc32_gen
            #print(Padded_Bytes_bin_array[i:i+33]) 
    remaider_of_Padded_Bytes_bin_array = Padded_Bytes_bin_array[-32:]        
    CRC32_bytes = int(''.join(map(str, remaider_of_Padded_Bytes_bin_array)),2)       
    myCRC32Table = np.append(myCRC32Table,CRC32_bytes)
   



#hex_num = "EDB883208" # 要转换的十六进制数字

#################   下面是查表法方法计算CRC32 ===================================
Message1 ='0102'
Message1_bin = bin(int(Message1, 16))[2:].zfill(len(Message1)*4) # 将十六进制转换为十进制再转换为二进制
Message1_bin_array = np.array(list(Message1_bin), dtype=int)

##reverse the bits in each byte:

Message1_bin_array_reverse = np.zeros(0,dtype=int)
for i in range(int(np.size(Message1_bin_array)/8)) :
    tmp_flip = np.flipud(Message1_bin_array[i*8:i*8+8])
    tmp_flip_number = int(''.join(map(str, tmp_flip)),2)
    Message1_bin_array_reverse = np.append(Message1_bin_array_reverse,tmp_flip_number)

# 按照字节查询CRC32 table，前一个字节的CRC查表值的前8位需要和下个字节进行异或操作，算出来的新值作为新的查表索引值；每次查出的CRC值还需要和上一次查出的CRC值的高24位异或操作
crc32_result = 0
for i in range(int(np.size(Message1_bin_array_reverse))) :    
    if i < 4:
        Message1_bin_array_reverse[i] =Message1_bin_array_reverse[i] ^ 0xFF
    crc32_result =myCRC32Table[(crc32_result >> 24) ^ Message1_bin_array_reverse[i]] ^ (crc32_result & 0x00FFFFFF)<<8   

#### 如果输入数据小于4个字节，需要对FFFFFFFF剩余的FF特别处理下，比如原始输入数据1个字节，那么有3个0xFF没有在上面的代码中用到，所以要在下面的代码中异或上这三个FF
if int(np.size(Message1_bin_array_reverse)) < 4:
    if 4-int(np.size(Message1_bin_array_reverse))      ==1 :
        crc32_result = crc32_result ^ 0xFF000000
    if 4- int(np.size(Message1_bin_array_reverse))     ==2 :
        crc32_result = crc32_result ^ 0xFFFF0000                
    if 4- int(np.size(Message1_bin_array_reverse))     ==3 :
        crc32_result = crc32_result ^ 0xFFFFFF00
            


# Reverse the result:
crc32_result_bin = bin(crc32_result)[2:].zfill(32)
crc32_result_array = np.array(list(crc32_result_bin), dtype=int)
crc32_result_reverse = np.flipud(crc32_result_array)
crc32_result_reverse = ''.join(map(str, crc32_result_reverse))
print('crc32_result_reverse =  ',hex(int(crc32_result_reverse,2)))

crc32_result_reverse_complement  = int(crc32_result_reverse,2)^0xFFFFFFFF
print('crc32_result_reverse_complement',hex(crc32_result_reverse_complement))







#################   下面是多项式相除方法计算CRC32 ===================================

#Message ='8040C020'
Message ='0102'

Message_bin = bin(int(Message, 16))[2:].zfill(len(Message)*4) # 将十六进制转换为十进制再转换为二进制
#Message_bin = '01111001101110010011100111111111000000000000000000000000'
Message_bin_array = np.array(list(Message_bin), dtype=int)

############ Reverse input per byte
Message_bin_array_reverse = np.zeros(0,dtype=int)
for i in range(int(np.size(Message_bin_array)/8)) :
    tmp_flip = np.flipud(Message_bin_array[i*8:i*8+8])
    Message_bin_array_reverse = np.append(Message_bin_array_reverse,tmp_flip)


outputXor = 'ffffffff'
outputXor_bin = bin(int(outputXor, 16))[2:]
outputXor_array = np.array(list(outputXor_bin), dtype=int)

kk = len(Message)*4

 
# 使用np.pad()函数进行补零操作
padded_message = np.pad(Message_bin_array_reverse,(0, 32), mode='constant')
print("\n补零后的数组:\n", padded_message)

#padded_message = Message_bin_array

padded_outputXor = np.pad(outputXor_array,(0, kk), mode='constant')


#padded_message = padded_message^padded_outputXor

for i in range(len(padded_message)-33+1) :
    tmp_value = padded_message[i:i+33]
    print(tmp_value)
    if tmp_value[0] ==0:
        continue
    else:
        padded_message[i:i+33] =  tmp_value ^ crc32_gen
        print(padded_message[i:i+33]) 

remaider_of_padded_message = padded_message[-32:]

CRC32 = ''.join(map(str, remaider_of_padded_message))
print('remaider_of_padded_message = ',hex(int(CRC32,2)))
 
remaider_of_padded_message_reverse = np.flipud(remaider_of_padded_message)
CRC32 = ''.join(map(str, remaider_of_padded_message_reverse))
print('remaider_of_padded_message_reverse = ',hex(int(CRC32,2)))


for i in range(len(padded_outputXor)-33+1) :
    tmp_value = padded_outputXor[i:i+33]
    print(tmp_value)
    if tmp_value[0] ==0:
        continue
    else:
        padded_outputXor[i:i+33] =  tmp_value ^   crc32_gen
        print(padded_outputXor[i:i+33]) 
remaider_of_padded_outputXor = padded_outputXor[-32:]
remaider_of_padded_outputXor_reverse = np.flipud(remaider_of_padded_outputXor)
CRC32 = ''.join(map(str, remaider_of_padded_outputXor_reverse))
print('remaider_of_padded_outputXor_reverse = ',hex(int(CRC32,2)))



CRC32 = remaider_of_padded_message ^ remaider_of_padded_outputXor
CRC32_reverse = np.flipud(CRC32)

print(CRC32)

CRC32 = ''.join(map(str, CRC32))
print(hex(int(CRC32,2)))


print(CRC32_reverse)

CRC32_reverse = ''.join(map(str, CRC32_reverse))
print(hex(int(CRC32_reverse,2)))


CRC32_reverse_complement  = int(CRC32_reverse,2)^0xFFFFFFFF
print('CRC32_reverse_complement=',hex(CRC32_reverse_complement))

?注意：WLAN的MAC帧的FCS是完整的CRC32校验