内核线程创建-kthread_create

??文章参考Linux内核线程kernel thread详解 - 知乎

大概意思就是早期创建内核线程，是交由内核处理，由内核自己完成（感觉好像也不太对呢），创建一个内核线程比较麻烦，会导致内核阻塞。因此就诞生了工作队列以及现在的kthreadd 2号进程。这样我们在创建内核线程时，只需要将消息告诉它们，实际进行内核线程创建的任务有kthreadd完成，感觉类似一个下半部。

我环境使用的是kthreadd进行内核线程的创建

内核线程创建kthread_create

kthread_create-->kthread_create_on_node-->__kthread_create_on_node

#define kthread_create(threadfn, data, namefmt, arg...) \
	kthread_create_on_node(threadfn, data, NUMA_NO_NODE, namefmt, ##arg)

?可以看到这里只是将创建内核线程的任务加入了链表里面，然后唤醒kthreadd进行内核线程的创建

struct task_struct *__kthread_create_on_node(int (*threadfn)(void *data),
						    void *data, int node,
						    const char namefmt[],
						    va_list args)
{
	DECLARE_COMPLETION_ONSTACK(done);
	struct task_struct *task;
	struct kthread_create_info *create = kmalloc(sizeof(*create),
						     GFP_KERNEL);

	if (!create)
		return ERR_PTR(-ENOMEM);
	/* 被创建的内核线程的信息被存放到了create_info里面 */
	create->threadfn = threadfn;
	create->data = data;
	create->node = node;
	create->done = &done;

	spin_lock(&kthread_create_lock);
	/* 将create_info加入到链表中,然后唤醒kthreadd_task(2号进程)进行后续的内核线程创建 */
	list_add_tail(&create->list, &kthread_create_list);
	spin_unlock(&kthread_create_lock);

	wake_up_process(kthreadd_task);
	/*
	 * Wait for completion in killable state, for I might be chosen by
	 * the OOM killer while kthreadd is trying to allocate memory for
	 * new kernel thread.
	 */
	/* 
    这里是等待内核线程创建完成,内核线程创建完成后会释放这样完成量
    函数kthread里面会释放这个completion
    */
	if (unlikely(wait_for_completion_killable(&done))) {
		/*
		 * If I was SIGKILLed before kthreadd (or new kernel thread)
		 * calls complete(), leave the cleanup of this structure to
		 * that thread.
		 */
		if (xchg(&create->done, NULL))
			return ERR_PTR(-EINTR);
		/*
		 * kthreadd (or new kernel thread) will call complete()
		 * shortly.
		 */
		wait_for_completion(&done);
	}
    /* 函数kthread里面会将result赋值为创建好的内核线程的task_struct */
	task = create->result;
	if (!IS_ERR(task)) {
		static const struct sched_param param = { .sched_priority = 0 };
		char name[TASK_COMM_LEN];

		/*
		 * task is already visible to other tasks, so updating
		 * COMM must be protected.
		 */
		vsnprintf(name, sizeof(name), namefmt, args);
		set_task_comm(task, name);//这里设置内核线程的名字
		/*
		 * root may have changed our (kthreadd's) priority or CPU mask.
		 * The kernel thread should not inherit these properties.
		 */
		sched_setscheduler_nocheck(task, SCHED_NORMAL, &param);
		set_cpus_allowed_ptr(task, cpu_all_mask);
	}
	kfree(create);
	return task;
}

那2号进程kthreadd干了什么事情呢？

2号进程在rest_init里面创建，其处理函数为kthreadd

noinline void __ref rest_init(void)
{
	...............................
	pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
	rcu_read_lock();
	kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
	rcu_read_unlock();
............................
}

kthreadd-->create_kthread-->kernel_thread?

int kthreadd(void *unused)
{
	struct task_struct *tsk = current;

	/* Setup a clean context for our children to inherit. */
	set_task_comm(tsk, "kthreadd");
	ignore_signals(tsk);
	set_cpus_allowed_ptr(tsk, cpu_all_mask);
	set_mems_allowed(node_states[N_MEMORY]);

	current->flags |= PF_NOFREEZE;
	cgroup_init_kthreadd();
    /*
    其实就是一直检查kthread_create_list是否为空
    如果不为空，将不断的处理链表里面的任务处理,创建内核线程
    */
	for (;;) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (list_empty(&kthread_create_list))
			schedule();
		__set_current_state(TASK_RUNNING);

		spin_lock(&kthread_create_lock);
		while (!list_empty(&kthread_create_list)) {
			struct kthread_create_info *create;

			create = list_entry(kthread_create_list.next,
					    struct kthread_create_info, list);
			list_del_init(&create->list);
			spin_unlock(&kthread_create_lock);

			create_kthread(create);

			spin_lock(&kthread_create_lock);
		}
		spin_unlock(&kthread_create_lock);
	}

	return 0;
}

可以看到 内核线程的创建最终还是调用的kernel_thread。创建的内核线程会执行kthread，在函数kthread里面执行了我们设置的内核线程处理函数threadfun

static void create_kthread(struct kthread_create_info *create)
{
	int pid;

#ifdef CONFIG_NUMA
	current->pref_node_fork = create->node;
#endif
	/* We want our own signal handler (we take no signals by default). */
    /* 最终在kthread里面调用到我们设置的回调函数 */
	pid = kernel_thread(kthread, create, CLONE_FS | CLONE_FILES | SIGCHLD);
	if (pid < 0) {
		/* If user was SIGKILLed, I release the structure. */
		struct completion *done = xchg(&create->done, NULL);

		if (!done) {
			kfree(create);
			return;
		}
		create->result = ERR_PTR(pid);
		complete(done);
	}
}

kthread运行线程处理函数?

执行到这里,就算内核线程创建成功了.只不过它不会立即执行我们的threadfn(即创建内核线程时指定的函数)，它会先释放completion，并让出cpu。这就是kthread_create后还需要wake_up_process的原因。

static int kthread(void *_create)
{
	/* Copy data: it's on kthread's stack */
	struct kthread_create_info *create = _create;
	int (*threadfn)(void *data) = create->threadfn;
	void *data = create->data;
	struct completion *done;
	struct kthread *self;
	int ret;

	self = kzalloc(sizeof(*self), GFP_KERNEL);
	set_kthread_struct(self);

	/* If user was SIGKILLed, I release the structure. */
	/* 将create->done赋值为NULL，并返回create->done原来的值 */
	done = xchg(&create->done, NULL);
	if (!done) {
		kfree(create);
		do_exit(-EINTR);
	}

	if (!self) {
		create->result = ERR_PTR(-ENOMEM);
		complete(done);
		do_exit(-ENOMEM);
	}

	self->data = data;
	init_completion(&self->exited);
	init_completion(&self->parked);
	/* 此时的current就已经是我们创建好的内核线程了 */
	current->vfork_done = &self->exited;

	/* OK, tell user we're spawned, wait for stop or wakeup */
	__set_current_state(TASK_UNINTERRUPTIBLE);
	//__kthread_create_on_node里面将result当做返回值的原因在这里体现
	create->result = current;
	/* 在这里释放的completion,__kthread_create_on_node才会继续往下走 */
	complete(done);
	/*
	可以看到内核线程创建完了会先让出cpu,并不会立即执行我们的线程处理函数
	这就是我们为什么需要wake_up_process的原因,需要wake之后，才会继续从这里执行
	然后走到我们的threadfn
	*/
	schedule();

	ret = -EINTR;
	/*这个检查,我怀疑就是导致kthread_stop表现出不同行为的原因*/
	if (!test_bit(KTHREAD_SHOULD_STOP, &self->flags)) {
		cgroup_kthread_ready();
		__kthread_parkme(self);
	    /* 执行内核线程设置的处理函数 */
		ret = threadfn(data);
	}
	/* 可以看到如果threadfn执行完了,内核线程退出是do_exit */
	do_exit(ret);
}

经过实际验证确实是kthread调用了complete(done);，kthread_create才能返回，否则__kthread_create_on_node会一直等待completion

测试代码如下

起了个定时器,定时器里面唤醒了一个内核线程.内核线程里面做了两个事情,一个是将comp_block设置为true,即跳过complete(done)，另外一个是创建一个内核线程，看看是否会阻塞

struct task_struct *task;
struct timer_list timer;
/* 通过该变量控制是否是否completion */
extern bool comp_block;

int kill_thread(void* a)
{
	/* 不释放completion，然后再看看kthread_create是否会阻塞 */
    comp_block = true;
    
    printk(KERN_EMERG "\r\n before create thread\n");
	kthread_create(test_thread, NULL, "test_task");
    printk(KERN_EMERG "\r\n after create thread\n");
	return;
}
void timer_work(unsigned long data)
{
	wake_up_process(task);
	return;
}

static int smsc911x_init(struct net_device *dev)
{
...............................
	printk(KERN_EMERG "\r\n softlockup simulate, in_interrupt %u in_softirq %u, NR_CPUS %d\n", in_interrupt(), in_softirq(), NR_CPUS);
	
	timer.expires=jiffies+msecs_to_jiffies(20000);
	timer.function=timer_work;
	init_timer(&timer);
	add_timer(&timer);
	printk(KERN_EMERG "\r\n create thread\n");	
	task = kthread_create(kill_thread, NULL, "kill_task");
	printk(KERN_EMERG "\r\n create thread end\n");
....................................
}

bool comp_block = false;
static int kthread(void *_create)
{
...............................
	/* OK, tell user we're spawned, wait for stop or wakeup */
	__set_current_state(TASK_UNINTERRUPTIBLE);
	create->result = current;
	if (false == comp_block)
	{
		complete(done);
	}
	schedule();
..........................................
}

效果展示?：可以看到并未打印kthread_create后面的log，并且内核线程kill_task也是一直无法退出

?

?如果定时器里面不设置comp_block的值，即正常释放completion，log如下

内核线程退出kthread_stop

kthread_stop:只是告诉内核线程应该退出了，但是要不要退出，还需要看内核线程处理函数是否检查该消息，并且检查到以后还必须主动退出。

1、设置内核线程为KTHREAD_SHOULD_STOP，当内核线程的处理函数用kthread_should_stop检查标记时，能感知到该事件（如果内核线程一直不检查，那么即使调用了kthread_stop也是没有用的）

2、重新唤醒内核线程，如何内核线程没有运行，那么也是无法感知到这个事件的

3、等待completion释放

int kthread_stop(struct task_struct *k)
{
	struct kthread *kthread;
	int ret;

	trace_sched_kthread_stop(k);

	get_task_struct(k);
	kthread = to_kthread(k);
	set_bit(KTHREAD_SHOULD_STOP, &kthread->flags);
	kthread_unpark(k);
	wake_up_process(k);
	wait_for_completion(&kthread->exited);
	ret = k->exit_code;
	put_task_struct(k);

	trace_sched_kthread_stop_ret(ret);
	return ret;
}

wait_for_completion(&kthread->exited);?

这个是在哪里释放的呢？

exited其实就是vfork_done，

static int kthread(void *_create)
{
........................................
	self->data = data;
	init_completion(&self->exited);
	init_completion(&self->parked);
	/* 此时的current就已经是我们创建好的内核线程了 */
	current->vfork_done = &self->exited;

..............................
	do_exit(ret);
}

?那么vfork_done是在哪里释放的呢？

do_exit-->exit_mm-->exit_mm_release-->mm_release

static void mm_release(struct task_struct *tsk, struct mm_struct *mm)
{
...................................
	/*
	 * All done, finally we can wake up parent and return this mm to him.
	 * Also kthread_stop() uses this completion for synchronization.
	 */
	if (tsk->vfork_done)
		complete_vfork_done(tsk);
}