key.h
#ifndef __KEY__H__
#define __KEY__H__
#include "stm32mp1xx_gic.h"
#include "stm32mp1xx_exti.h"
#include "stm32mp1xx_gpio.h"
#include "stm32mp1xx_rcc.h"
void key1_init();
void key2_init();
void key3_init();
#endif
key.c
#include "key_it.h"
void key1_init()
{
//使能GPIOF时钟
RCC->MP_AHB4ENSETR |= (0x1<<5);
//设置PF9管脚为输入
GPIOF->MODER &= (~(0x3<<18));
//设置PF9作为EXTI9事件的输入
EXTI->EXTICR3 &= (~(0xff<<8));
EXTI->EXTICR3 |= (0x5<<8);
//设置下降沿使能检测EXTI9事件
EXTI->FTSR1 |= (0x1<<9);
//设置EXTI9事件不屏蔽
EXTI->C1IMR1 |= (0x1<<9);
//GICD使能EXTI9(99号)中断
GICD->ISENABLER[3] |= (0x1<<3);
//GICD 设置99号中断的优先级
GICD->IPRIORITYR[24] &= (~(0x0<<27));
//选择CPU0处理当前中断
GICD->ITARGETSR[24] |= (0x1<<24);
//全局使能组0中断被转发到GICC
GICD->CTRL |= (0x1);
//设置中断的优先级掩码
GICC->PMR |= (0x1f<<3);
//允许组0中断被CPU处理
GICC->CTRL |= (0x1);
}
void key2_init()
{
//设置PF8管脚为输入
GPIOF->MODER &= (~(0x3<<16));
//设置PF8作为EXTI8事件的输入
EXTI->EXTICR3 &= (~(0xff));
EXTI->EXTICR3 |= (0x5);
//设置下降沿使能检测EXTI8事件
EXTI->FTSR1 |= (0x1<<8);
//设置EXTI8事件不屏蔽
EXTI->C1IMR1 |= (0x1<<8);
//GICD使能EXTI8(98号)中断
GICD->ISENABLER[3] |= (0x1<<2);
//GICD 设置98号中断的优先级
GICD->IPRIORITYR[24] &= (~(0x01<<19));
//选择CPU0处理当前中断
GICD->ITARGETSR[24] |= (0x1<<16);
}
void key3_init()
{
//设置PF7管脚为输入
GPIOF->MODER &= (~(0x3<<14));
//设置PF7作为EXTI7事件的输入
EXTI->EXTICR2 &= (~(0xff<<24));
EXTI->EXTICR2 |= (0x5<<24);
//设置下降沿使能检测EXTI7事件
EXTI->FTSR1 |= (0x1<<7);
//设置EXTI7事件不屏蔽
EXTI->C1IMR1 |= (0x1<<7);
//GICD使能EXTI7(97号)中断
GICD->ISENABLER[3] |= (0x1<<1);
//GICD 设置97号中断的优先级
GICD->IPRIORITYR[24] &= (~(0x02<<11));
//选择CPU0处理当前中断
GICD->ITARGETSR[24] |= (0x1<<8);
}
main.c
#include "key_it.h"
void delay(int ms)
{
for(int i=0; i<ms; i++)
{
for(int j=0; j<2000; j++);
}
}
int main()
{
key1_init();
key2_init();
key3_init();
while(1)
{
printf("asdasdasd\n");
delay(1000);
}
return 0;
}