NAT实验

?实验拓扑及要求

网段：

192.168.1.0 24

12.1.1.0? 24

1.1.1.0 24

IP配置

[r1-GigabitEthernet0/0/0]ip ad 192.168.1.1 24

[r1-GigabitEthernet0/0/1]ip ad 12.1.1.1 24

[r2-GigabitEthernet0/0/0]ip ad 12.1.1.2 24

[r2-GigabitEthernet0/0/1]ip ad 1.1.1.1?24

pc1：192.168.1.2 24

pc2：192.168.1.3 24

HTTP1：192.168.1.4?24

HTTP2;192.168.1.5 24

client：1.1.1.2 24

DNS：1.1.1.3 24

添加静态路由[r1]ip route-static 1.1.1.0 24 12.1.1.2

缺省路由[r1]ip route-static 1.1.1.0 24 12.1.1.2

pc1pc2可以ping通client和DNS? ? ?一对多

使用acl，定义可被转化的私有IP地址范围

[r1]acl 2000

[r1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255

再在r1（边界路由器）上，公有IP地址所在接口进行nat配置?

[r1]interface g0/0/1

[r1-GigabitEthernet0/0/1]nat outbound 2000

[r1-GigabitEthernet0/0/1]nat static global 12.1.1.3 inside 192.168.1.4

但只有一个公有地址

[r1-GigabitEthernet0/0/1]undo nat static global 12.1.1.3 inside 192.168.1.4

端口映射

[r1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 80 inside 192.168.1.4 80
Warning:The port 80 is well-known port. If you continue it may cause function fa
ilure.
Are you sure to continue?[Y/N]:y

[r1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 8888 inside 192.168.1.5 80

?