CK_Label_V1 & V9 & V10 & V11&V15 System Developer‘s Manual
Register PTL
You should register the PTL to our Management System first;
Register CK_Label_V1
Quickly press the side button three times
Register ok：The led will turn off after flashing red light and the buzzer will beep once if the registration is successful
Register CK_Label_V9
Use a magnet to approach the bottom white circle.
Register ok：Led light changes from red light on to green light on and then goes out
Register CK_Label_V11 & CK_Label_V15
Use a magnet to approach the barcode.
Register ok：
CK_Label_V11: Led light changes from flashing green light to red light and then goes out
CK_Label_V15: Led light changes from flashing red light to flashing green light and then goes out
Query PTL Tags Information
Introduction to the API：
Query all PTL tags information
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | http://localhost/wms/associate/getTagsMsg |
| Request Method | GET/POST |
| Content-Type | multipart/form-data |
Request parameters：
Parameter Description：
| Attributes | Value | Required | Comment |
|---|---|---|---|
Response parameters：
| Attributes | Value | Types | Comment |
|---|---|---|---|
| lastOpreateTime | "2021-10-13 03:32:30" | string | Last opreate TIme |
| mac | "99.97.36.55" | string | Tag mac/Tag ID |
| power | 100 | string | Battery power(0~100) |
| routerid | CWR000001 | string | ID of BindRouter |
| rssi | -26 | int | Signal strength (-100 ~ 0) |
| showStyle | "Picking Template" | string | Using template name |
Response example：
| [{"lastOpreateTime": "2021-10-13 03:32:29","mac": "99.97.36.55","power": 100,"routerid": "CWR000001","rssi": -30,"showStyle": "Picking Template"},{"lastOpreateTime": "2021-10-13 03:32:30","mac": "99.97.36.53","power": 100,"routerid": "CWR000001","rssi": -26,"showStyle": "Picking Template"},{"lastOpreateTime": "2021-10-13 03:32:33","mac": "99.97.36.48","power": 88,"routerid": "CWR000001","rssi": -39,"showStyle": "Picking Template"}] |
|---|
Callback of button event
Introduction to the API：
Notification of button event.
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | URL of user's callback API |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| Attributes | Types | Required | Comment |
|---|---|---|---|
| mac | string | yes | Tag mac / Tag ID |
| result | bool | Yes | result=3，press button event；result=4，light off after timeout； |
Parameters example：
Json object
| {"mac":"92.91.34.99","result":3} |
|---|
Light Leds of PTL
Introduction to the API：
Light Led of PTL.
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | http://localhost/wms/associate/lightTagsLed |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| Attributes | Types | Required | Comment |
|---|---|---|---|
| mac | string | Yes | Tag mac / Tag ID |
| lednum | int | Yes | fixed value : 255 |
| timeout | int | Yes | Lighting timeout time(s);0 : never turn offn : turn off autoAutomatically after n seconds |
| ledmode | int | Yes | 0, Led always on1, Led flash Interval 500ms2, Led flash Interval 1000ms3, Turn off the Led |
| ledrgb | string | Yes | led color:red，ledrgb =“ff0000”;green，ledrgb=“ff00”;blue，ledrgb=“ff”;yellow，ledrgb=“ffff00”;white，ledrgb=“ffffff”;purple，ledrgb=“ff00ff”;light blue，ledrgb= “00ffff”;no color, ledrgb=“0” |
| buzzer | int | Yes | Buzzer switch:1 buzeer on2 buzzer off |
| quantity | int | Yes | Reserved field |
Raw example：
| [{"mac":"99.29.05.33","lednum":255,"timeout":0,"ledrgb":"ff00","ledmode":0,"buzzer":0, "reserve":"reserve"},{"mac":"99.28.88.12","lednum":255,"timeout":0,"ledrgb":"ff00ff","ledmode":0,"buzzer":0, "reserve":"reserve"}] |
|---|
Response parameters：
| Attributes | Value | Types | Comment |
|---|---|---|---|
Response example：
| true |
|---|
Callback of Light Leds Result
Introduction to the API：
Notification the result of Light Leds
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | URL of user's callback API |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| Attributes | Types | Required | Comment |
|---|---|---|---|
| mac | string | yes | Tag mac / Tag ID |
| power | int | yes | Battery power(0~100) |
| result | bool | Yes | true ：ok；false: failed； |
| lednum | int | no | reserver multi-light PTL |
| message | string | no | Prompt information |
| cmdtoken | string | no | reserver |
Parameters example：
| {"cmdtoken":"","lednum":0,"mac":"99.26.39.63","message":"send successfully","power":100,"result":true} |
|---|
Light Roadway Lights(CK_Lable_V9)
Introduction to the API：
Light Roadway Lights
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | http://localhost/wms/associate/ctrlShelfIndicator |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| Attributes | Types | Required | Comment |
|---|---|---|---|
| mac | string | yes | Tag mac / Tag ID |
| timeout | int | yes | Lighting timeout time(s);0 : never turn offn : turn off autoAutomatically after n seconds |
| ledrgb | string | yes | red：ff0000; red Led Ongreen：ff00；green Led Onyellow：ffff00; yellow Led On |
| ledstate | int | Yes | lightint mode;0, always on1, quick flash2, slow flash |
| buzzer | int | yes | 0：Buzzer off，1：Buzzer on |
| reserve | string | optional | reserve |
Raw example：
| [{"mac":"99.29.03.13","lednum":1,"timeout":0,"ledrgb":"ffff00","ledmode":0,"buzzer":0,"cmdtoken":"123456","reserve":"reserve"},{"mac":"99.29.05.33","lednum":1,"timeout":0,"ledrgb":"ff00ff","ledmode":0,"buzzer":0,"cmdtoken":"123456","reserve":"reserve"}] |
|---|
Response example：
| true |
|---|
Callback of CK_Lable_V9 light Result
Introduction to the API：
Notification the result of Light Roadway Lights
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | URL of user's callback API |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| Attributes | Types | Required | Comment |
|---|---|---|---|
| mac | string | yes | Tag mac / Tag ID |
| result | bool | Yes | true ：ok；false: failed； |
Parameters example：
| {"mac":"99.26.39.63","result":true} |
|---|
Setting URL of user's callback API
Login wms system with admin user，go to “System Information”->“Third-party configuration”，you can config the Callback URL here:
| 反馈类型 | 描述 | 地址 |
|---|---|---|
| Callback of UpdateScreen result | updateTagResult | URL of user's callback API |
| Callback of button event (Support CK_Label_V10, CK_Label_V3) | enterKey | URL of user's callback API |
| Callback of Light Leds Result(Support CK_Label_V1, CK_Label_V3,CK_Label_V9,CK_Label_V11) | ctrlShelfIndicatorResult | URL of user's callback API |
| Callback of button event (Support CK_Label_V1, CK_Label_V11) | pickButton | URL of user's callback AP |
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符，请联系我的编程经验分享网邮箱：chenni525@qq.com进行投诉反馈，一经查实，立即删除！
- Python教程
- 深入理解 MySQL 中的 HAVING 关键字和聚合函数
- Qt之QChar编码（1）
- MyBatis入门基础篇
- 用Python脚本实现FFmpeg批量转换
- Ubuntu server搭建dhcp服务器
- 智慧水务总体设计
- VUE---组件的样式冲突scoped
- 面试 React 框架八股文十问十答第十二期
- 设计模式之装饰器模式
- MS713/MS713T：CMOS 低压、4Ω四路单刀单掷开关，替代ADG713
- 大数据讲课笔记1.3 Linux目录操作
- Modbus网关BL101 既实现Modbus转MQTT，还能当串口服务器使用
- Ensp AR/WLAN设备启动失败问题 错误代码41 解决方案
- javascript设计模式-应用示例