Mysql 8.0新特性详解

发布时间：2024年01月08日

欢迎大家关注我的微信公众号：
?

建议使用8.0.17及之后的版本，更新的内容比较多。本文只讲解了一些常用到的新特性。?

1、新增降序索引?

????????MySQL在语法上很早就已经支持降序索引，但实际上创建的仍然是升序索引，如下MySQL 5.7 所示，c2字段降序，但是从show create table看c2仍然是升序。8.0可以看到，c2字段降序。只有Innodb存储引擎支持降序索引。?

# ====MySQL 5.7演示====
mysql> create table t1(c1 int,c2 int,index idx_c1_c2(c1,c2 desc));
Query OK, 0 rows affected (0.04 sec)

mysql> insert into t1 (c1,c2) values(1, 10),(2,50),(3,50),(4,100),(5,80);
Query OK, 5 rows affected (0.02 sec)

mysql> show create table t1\G
*************************** 1. row ***************************
       Table: t1
Create Table: CREATE TABLE `t1` (
  `c1` int(11) DEFAULT NULL,
  `c2` int(11) DEFAULT NULL,
  KEY `idx_c1_c2` (`c1`,`c2`)    --注意这里，c2字段是升序
) ENGINE=InnoDB DEFAULT CHARSET=latin1
1 row in set (0.00 sec)

mysql> explain select * from t1 order by c1,c2 desc;  --5.7也会使用索引，但是Extra字段里有filesort文件排序
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
| id | select_type | table | partitions | type  | possible_keys | key       | key_len | ref  | rows | filtered | Extra                       |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
|  1 | SIMPLE      | t1    | NULL       | index | NULL          | idx_c1_c2 | 10      | NULL |    1 |   100.00 | Using index; Using filesort |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
1 row in set, 1 warning (0.01 sec)

# ====MySQL 8.0演示====
mysql> create table t1(c1 int,c2 int,index idx_c1_c2(c1,c2 desc));
Query OK, 0 rows affected (0.02 sec)

mysql> insert into t1 (c1,c2) values(1, 10),(2,50),(3,50),(4,100),(5,80);
Query OK, 5 rows affected (0.02 sec)

mysql> show create table t1\G
*************************** 1. row ***************************
       Table: t1
Create Table: CREATE TABLE `t1` (
  `c1` int DEFAULT NULL,
  `c2` int DEFAULT NULL,
  KEY `idx_c1_c2` (`c1`,`c2` DESC)  --注意这里的区别，降序索引生效了
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_0900_ai_ci
1 row in set (0.00 sec)

mysql> explain select * from t1 order by c1,c2 desc;  --Extra字段里没有filesort文件排序，充分利用了降序索引
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-------------+
| id | select_type | table | partitions | type  | possible_keys | key       | key_len | ref  | rows | filtered | Extra       |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-------------+
|  1 | SIMPLE      | t1    | NULL       | index | NULL          | idx_c1_c2 | 10      | NULL |    1 |   100.00 | Using index |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-------------+
1 row in set, 1 warning (0.00 sec)

mysql> explain select * from t1 order by c1 desc,c2;  --Extra字段里有Backward index scan，意思是反向扫描索引;
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+----------------------------------+
| id | select_type | table | partitions | type  | possible_keys | key       | key_len | ref  | rows | filtered | Extra                            |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+----------------------------------+
|  1 | SIMPLE      | t1    | NULL       | index | NULL          | idx_c1_c2 | 10      | NULL |    1 |   100.00 | Backward index scan; Using index |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+----------------------------------+
1 row in set, 1 warning (0.00 sec)

mysql> explain select * from t1 order by c1 desc,c2 desc;  --Extra字段里有filesort文件排序，排序必须按照每个字段定义的排序或按相反顺序才能充分利用索引
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
| id | select_type | table | partitions | type  | possible_keys | key       | key_len | ref  | rows | filtered | Extra                       |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
|  1 | SIMPLE      | t1    | NULL       | index | NULL          | idx_c1_c2 | 10      | NULL |    1 |   100.00 | Using index; Using filesort |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
1 row in set, 1 warning (0.00 sec)

mysql> explain select * from t1 order by c1,c2;    --Extra字段里有filesort文件排序，排序必须按照每个字段定义的排序或按相反顺序才能充分利用索引
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
| id | select_type | table | partitions | type  | possible_keys | key       | key_len | ref  | rows | filtered | Extra                       |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
|  1 | SIMPLE      | t1    | NULL       | index | NULL          | idx_c1_c2 | 10      | NULL |    1 |   100.00 | Using index; Using filesort |
+----+-------------+-------+------------+-------+---------------+-----------+---------+------+------+----------+-----------------------------+
1 row in set, 1 warning (0.00 sec)

2、group by 不再隐式排序?

????????mysql 8.0 对于group by 字段不再隐式排序，如需要排序，必须显式加上order by 子句。?

# ====MySQL 5.7演示====
mysql> select count(*),c2 from t1 group by c2;
+----------+------+
| count(*) | c2   |
+----------+------+
|        1 |   10 |
|        2 |   50 |
|        1 |   80 |
|        1 |  100 |
+----------+------+
4 rows in set (0.00 sec)


# ====MySQL 8.0演示====
--8.0版本group by不再默认排序
mysql> select count(*),c2 from t1 group by c2;   
+----------+------+
| count(*) | c2   |
+----------+------+
|        1 |   10 |
|        2 |   50 |
|        1 |  100 |
|        1 |   80 |
+----------+------+
4 rows in set (0.00 sec)

 --8.0版本group by不再默认排序，需要自己加order by
mysql> select count(*),c2 from t1 group by c2 order by c2; 
+----------+------+
| count(*) | c2   |
+----------+------+
|        1 |   10 |
|        2 |   50 |
|        1 |   80 |
|        1 |  100 |
+----------+------+
4 rows in set (0.00 sec)

3、增加隐藏索引?

????????使用 invisible 关键字在创建表或者进行表变更中设置索引为隐藏索引。索引隐藏只是不可见，但是数据库后台还是会维护隐藏索引的，在查询时优化器不使用该索引，即使用force index，优化器也不会使用该索引，同时优化器也不会报索引不存在的错误，因为索引仍然真实存在，必要时，也可以把隐藏索引快速恢复成可见。注意，主键不能设置为 invisible。

????????软删除就可以使用隐藏索引，比如我们觉得某个索引没用了，删除后发现这个索引在某些时候还是有用的，于是又得把这个索引加回来，如果表数据量很大的话，这种操作耗费时间是很多的，成本很高，这时，我们可以将索引先设置为隐藏索引，等到真的确认索引没用了再删除。

# 创建t2表，里面的c2字段为隐藏索引
mysql> create table t2(c1 int, c2 int, index idx_c1(c1), index idx_c2(c2) invisible);
Query OK, 0 rows affected (0.02 sec)

mysql> show index from t2\G
*************************** 1. row ***************************
        Table: t2
   Non_unique: 1
     Key_name: idx_c1
 Seq_in_index: 1
  Column_name: c1
    Collation: A
  Cardinality: 0
     Sub_part: NULL
       Packed: NULL
         Null: YES
   Index_type: BTREE
      Comment: 
Index_comment: 
      Visible: YES
   Expression: NULL
*************************** 2. row ***************************
        Table: t2
   Non_unique: 1
     Key_name: idx_c2
 Seq_in_index: 1
  Column_name: c2
    Collation: A
  Cardinality: 0
     Sub_part: NULL
       Packed: NULL
         Null: YES
   Index_type: BTREE
      Comment: 
Index_comment: 
      Visible: NO   --隐藏索引不可见
   Expression: NULL
2 rows in set (0.00 sec)

mysql> explain select * from t2 where c1=1;
+----+-------------+-------+------------+------+---------------+--------+---------+-------+------+----------+-------+
| id | select_type | table | partitions | type | possible_keys | key    | key_len | ref   | rows | filtered | Extra |
+----+-------------+-------+------------+------+---------------+--------+---------+-------+------+----------+-------+
|  1 | SIMPLE      | t2    | NULL       | ref  | idx_c1        | idx_c1 | 5       | const |    1 |   100.00 | NULL  |
+----+-------------+-------+------------+------+---------------+--------+---------+-------+------+----------+-------+
1 row in set, 1 warning (0.00 sec)

mysql> explain select * from t2 where c2=1;  --隐藏索引c2不会被使用
+----+-------------+-------+------------+------+---------------+------+---------+------+------+----------+-------------+
| id | select_type | table | partitions | type | possible_keys | key  | key_len | ref  | rows | filtered | Extra       |
+----+-------------+-------+------------+------+---------------+------+---------+------+------+----------+-------------+
|  1 | SIMPLE      | t2    | NULL       | ALL  | NULL          | NULL | NULL    | NULL |    1 |   100.00 | Using where |
+----+-------------+-------+------------+------+---------------+------+---------+------+------+----------+-------------+
1 row in set, 1 warning (0.00 sec)

4、新增函数索引?

????????之前我们知道，如果在查询中加入了函数，索引不生效，所以MySQL 8引入了函数索引，MySQL 8.0.13开始支持在索引中使用函数(表达式)的值。

????????函数索引基于虚拟列功能实现，在MySQL中相当于新增了一个列，这个列会根据你的函数来进行计算结果，然后使用函数索引的时候就会用这个计算后的列作为索引。

mysql> create table t3(c1 varchar(10),c2 varchar(10));
Query OK, 0 rows affected (0.02 sec)

mysql> create index idx_c1 on t3(c1);     --创建普通索引
Query OK, 0 rows affected (0.03 sec)
Records: 0  Duplicates: 0  Warnings: 0

mysql> create index func_idx on t3((UPPER(c2)));  --创建一个大写的函数索引
Query OK, 0 rows affected (0.03 sec)
Records: 0  Duplicates: 0  Warnings: 0

mysql> show index from t3\G
*************************** 1. row ***************************
        Table: t3
   Non_unique: 1
     Key_name: idx_c1
 Seq_in_index: 1
  Column_name: c1
    Collation: A
  Cardinality: 0
     Sub_part: NULL
       Packed: NULL
         Null: YES
   Index_type: BTREE
      Comment: 
Index_comment: 
      Visible: YES
   Expression: NULL
*************************** 2. row ***************************
        Table: t3
   Non_unique: 1
     Key_name: func_idx
 Seq_in_index: 1
  Column_name: NULL
    Collation: A
  Cardinality: 0
     Sub_part: NULL
       Packed: NULL
         Null: YES
   Index_type: BTREE
      Comment: 
Index_comment: 
      Visible: YES
   Expression: upper(`c2`)    --函数表达式
2 rows in set (0.00 sec)

mysql> explain select * from t3 where upper(c1)='ZHUGE';
+----+-------------+-------+------------+------+---------------+------+---------+------+------+----------+-------------+
| id | select_type | table | partitions | type | possible_keys | key  | key_len | ref  | rows | filtered | Extra       |
+----+-------------+-------+------------+------+---------------+------+---------+------+------+----------+-------------+
|  1 | SIMPLE      | t3    | NULL       | ALL  | NULL          | NULL | NULL    | NULL |    1 |   100.00 | Using where |
+----+-------------+-------+------------+------+---------------+------+---------+------+------+----------+-------------+
1 row in set, 1 warning (0.00 sec)

mysql> explain select * from t3 where upper(c2)='ZHUGE';  --使用了函数索引
+----+-------------+-------+------------+------+---------------+----------+---------+-------+------+----------+-------+
| id | select_type | table | partitions | type | possible_keys | key      | key_len | ref   | rows | filtered | Extra |
+----+-------------+-------+------------+------+---------------+----------+---------+-------+------+----------+-------+
|  1 | SIMPLE      | t3    | NULL       | ref  | func_idx      | func_idx | 43      | const |    1 |   100.00 | NULL  |
+----+-------------+-------+------------+------+---------------+----------+---------+-------+------+----------+-------+
1 row in set, 1 warning (0.00 sec)

5、innodb存储引擎select for update跳过锁等待?

????????对于select ... for share(8.0新增加查询共享锁的语法)或 select ... for update，在语句后面添加NOWAIT、SKIP LOCKED语法可以跳过锁等待，或者跳过锁定。

????????在5.7及之前的版本，select...for update，如果获取不到锁，会一直等待，直到innodb_lock_wait_timeout超时。

????????在8.0版本，通过添加nowait，skip locked语法，能够立即返回。如果查询的行已经加锁，那么nowait会立即报错返回，而skip locked也会立即返回，只是返回的结果中不包含被锁定的行。

# 先打开一个session1:
mysql> select * from t1;
+------+------+
| c1   | c2   |
+------+------+
|    1 |   10 |
|    2 |   50 |
|    3 |   50 |
|    4 |  100 |
|    5 |   80 |
+------+------+
5 rows in set (0.00 sec)
    
mysql> begin;
Query OK, 0 rows affected (0.00 sec)

mysql> update t1 set c2 = 60 where c1 = 2;     --锁定第二条记录
Query OK, 1 row affected (0.00 sec)
Rows matched: 1  Changed: 1  Warnings: 0


# 另外一个session2:    
mysql> select * from t1 where c1 = 2 for update;   --等待超时
ERROR 1205 (HY000): Lock wait timeout exceeded; try restarting transaction

mysql> select * from t1 where c1 = 2 for update nowait;   --查询立即返回
ERROR 3572 (HY000): Statement aborted because lock(s) could not be acquired immediately and NOWAIT is set.

mysql> select * from t1 for update skip locked;  --查询立即返回，过滤掉了第二行记录
+------+------+
| c1   | c2   |
+------+------+
|    1 |   10 |
|    3 |   50 |
|    4 |  100 |
|    5 |   80 |
+------+------+
4 rows in set (0.00 sec)

6、窗口函数(Window Functions)：也称分析函数?

????????从 MySQL 8.0 开始，新增了一个叫窗口函数的概念，它可以用来实现若干新的查询方式。窗口函数与 SUM()、COUNT() 这种分组聚合函数类似，在聚合函数后面加上over()就变成窗口函数了，在括号里可以加上partition by等分组关键字指定如何分组，窗口函数即便分组也不会将多行查询结果合并为一行，而是将结果放回多行当中，即窗口函数不需要再使用 GROUP BY。?

# 创建一张账户余额表
CREATE TABLE `account_channel` (
  `id` int NOT NULL AUTO_INCREMENT,
  `name` varchar(255) CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci DEFAULT NULL COMMENT '姓名',
  `channel` varchar(20) CHARACTER SET utf8mb4 COLLATE utf8mb4_0900_ai_ci DEFAULT NULL COMMENT '账户渠道',
  `balance` int DEFAULT NULL COMMENT '余额',
  PRIMARY KEY (`id`)
) ENGINE=InnoDB

# 插入一些示例数据
INSERT INTO `test`.`account_channel` (`id`, `name`, `channel`, `balance`) VALUES ('1', 'zhuge', 'wx', '100');
INSERT INTO `test`.`account_channel` (`id`, `name`, `channel`, `balance`) VALUES ('2', 'zhuge', 'alipay', '200');
INSERT INTO `test`.`account_channel` (`id`, `name`, `channel`, `balance`) VALUES ('3', 'zhuge', 'yinhang', '300');
INSERT INTO `test`.`account_channel` (`id`, `name`, `channel`, `balance`) VALUES ('4', 'lilei', 'wx', '200');
INSERT INTO `test`.`account_channel` (`id`, `name`, `channel`, `balance`) VALUES ('5', 'lilei', 'alipay', '100');
INSERT INTO `test`.`account_channel` (`id`, `name`, `channel`, `balance`) VALUES ('6', 'hanmeimei', 'wx', '500');

mysql> select * from account_channel;
+----+-----------+---------+---------+
| id | name      | channel | balance |
+----+-----------+---------+---------+
|  1 | zhuge     | wx      |     100 |
|  2 | zhuge     | alipay  |     200 |
|  3 | zhuge     | yinhang |     300 |
|  4 | lilei     | wx      |     200 |
|  5 | lilei     | alipay  |     100 |
|  6 | hanmeimei | wx      |     500 |
+----+-----------+---------+---------+
6 rows in set (0.00 sec)

mysql> select name,sum(balance) from account_channel group by name;
+-----------+--------------+
| name      | sum(balance) |
+-----------+--------------+
| zhuge     |          600 |
| lilei     |          300 |
| hanmeimei |          500 |
+-----------+--------------+
3 rows in set (0.00 sec)

# 在聚合函数后面加上over()就变成分析函数了，后面可以不用再加group by制定分组，因为在over里已经用partition关键字指明了如何分组计算，这种可以保留原有表数据的结构，不会像分组聚合函数那样每组只返回一条数据
mysql> select name,channel,balance,sum(balance) over(partition by name) as sum_balance from account_channel;
+-----------+---------+---------+-------------+
| name      | channel | balance | sum_balance |
+-----------+---------+---------+-------------+
| hanmeimei | wx      |     500 |         500 |
| lilei     | wx      |     200 |         300 |
| lilei     | alipay  |     100 |         300 |
| zhuge     | wx      |     100 |         600 |
| zhuge     | alipay  |     200 |         600 |
| zhuge     | yinhang |     300 |         600 |
+-----------+---------+---------+-------------+
6 rows in set (0.00 sec)

mysql> select name,channel,balance,sum(balance) over(partition by name order by balance) as sum_balance from account_channel;
+-----------+---------+---------+-------------+
| name      | channel | balance | sum_balance |
+-----------+---------+---------+-------------+
| hanmeimei | wx      |     500 |         500 |
| lilei     | alipay  |     100 |         100 |
| lilei     | wx      |     200 |         300 |
| zhuge     | wx      |     100 |         100 |
| zhuge     | alipay  |     200 |         300 |
| zhuge     | yinhang |     300 |         600 |
+-----------+---------+---------+-------------+
6 rows in set (0.00 sec)


# over()里如果不加条件，则默认使用整个表的数据做运算
mysql> select name,channel,balance,sum(balance) over() as sum_balance from account_channel;
+-----------+---------+---------+-------------+
| name      | channel | balance | sum_balance |
+-----------+---------+---------+-------------+
| zhuge     | wx      |     100 |        1400 |
| zhuge     | alipay  |     200 |        1400 |
| zhuge     | yinhang |     300 |        1400 |
| lilei     | wx      |     200 |        1400 |
| lilei     | alipay  |     100 |        1400 |
| hanmeimei | wx      |     500 |        1400 |
+-----------+---------+---------+-------------+
6 rows in set (0.00 sec)

mysql> select name,channel,balance,avg(balance) over(partition by name) as avg_balance from account_channel;
+-----------+---------+---------+-------------+
| name      | channel | balance | avg_balance |
+-----------+---------+---------+-------------+
| hanmeimei | wx      |     500 |    500.0000 |
| lilei     | wx      |     200 |    150.0000 |
| lilei     | alipay  |     100 |    150.0000 |
| zhuge     | wx      |     100 |    200.0000 |
| zhuge     | alipay  |     200 |    200.0000 |
| zhuge     | yinhang |     300 |    200.0000 |
+-----------+---------+---------+-------------+
6 rows in set (0.00 sec)

专用窗口函数：

序号函数：ROW_NUMBER()、RANK()、DENSE_RANK()
分布函数：PERCENT_RANK()、CUME_DIST()
前后函数：LAG()、LEAD()
头尾函数：FIRST_VALUE()、LAST_VALUE()
其它函数：NTH_VALUE()、NTILE()

# 按照balance字段排序，展示序号
mysql> select name,channel,balance,row_number() over(order by balance) as row_number1 from account_channel;
+-----------+---------+---------+-------------+
| name      | channel | balance | row_number1 |
+-----------+---------+---------+-------------+
| zhuge     | wx      |     100 |           1 |
| lilei     | alipay  |     100 |           2 |
| zhuge     | alipay  |     200 |           3 |
| lilei     | wx      |     200 |           4 |
| zhuge     | yinhang |     300 |           5 |
| hanmeimei | wx      |     500 |           6 |
+-----------+---------+---------+-------------+
6 rows in set (0.00 sec)

# 按照balance字段排序，first_value()选出排第一的余额
mysql> select name,channel,balance,first_value(balance) over(order by balance) as first1 from account_channel;
+-----------+---------+---------+--------+
| name      | channel | balance | first1 |
+-----------+---------+---------+--------+
| zhuge     | wx      |     100 |    100 |
| lilei     | alipay  |     100 |    100 |
| zhuge     | alipay  |     200 |    100 |
| lilei     | wx      |     200 |    100 |
| zhuge     | yinhang |     300 |    100 |
| hanmeimei | wx      |     500 |    100 |
+-----------+---------+---------+--------+
6 rows in set (0.01 sec)

7、默认字符集由latin1变为utf8mb4

????????在8.0版本之前，默认字符集为latin1，utf8指向的是utf8mb3，8.0版本默认字符集为utf8mb4，utf8默认指向的也是utf8mb4。

8、MyISAM系统表全部换成InnoDB表

????????将系统表(mysql)和数据字典表全部改为InnoDB存储引擎，默认的MySQL实例将不包含MyISAM表，除非手动创建MyISAM表。

9、自增变量持久化

????????在8.0之前的版本，自增主键AUTO_INCREMENT的值如果大于max(primary?key)+1，在MySQL重启后，会重置AUTO_INCREMENT=max(primary?key)+1，这种现象在某些情况下会导致业务主键冲突或者其他难以发现的问题。自增主键重启重置的问题很早就被发现(https://bugs.mysql.com/bug.php?id=199)，一直到8.0才被解决，8.0版本将会对AUTO_INCREMENT值进行持久化，MySQL重启后，该值将不会改变。?

# ====MySQL 5.7演示====
mysql> create table t(id int auto_increment primary key,c1 varchar(20));
Query OK, 0 rows affected (0.03 sec)

mysql> insert into t(c1) values('zhuge1'),('zhuge2'),('zhuge3');
Query OK, 3 rows affected (0.00 sec)
Records: 3  Duplicates: 0  Warnings: 0

mysql> select * from t;
+----+--------+
| id | c1     |
+----+--------+
|  1 | zhuge1 |
|  2 | zhuge2 |
|  3 | zhuge3 |
+----+--------+
3 rows in set (0.00 sec)

mysql> delete from t where id = 3;
Query OK, 1 row affected (0.01 sec)

mysql> select * from t;
+----+--------+
| id | c1     |
+----+--------+
|  1 | zhuge1 |
|  2 | zhuge2 |
+----+--------+
2 rows in set (0.00 sec)

mysql> exit;
Bye

# 重启MySQL服务，并重新连接MySQL
mysql> insert into t(c1) values('zhuge4');
Query OK, 1 row affected (0.01 sec)

# 新增的数据，id仍然为3
mysql> select * from t;
+----+--------+
| id | c1     |
+----+--------+
|  1 | zhuge1 |
|  2 | zhuge2 |
|  3 | zhuge4 |
+----+--------+
3 rows in set (0.00 sec)

# ====MySQL 8.0演示====
mysql> create table t(id int auto_increment primary key,c1 varchar(20));
Query OK, 0 rows affected (0.02 sec)

mysql> insert into t(c1) values('zhuge1'),('zhuge2'),('zhuge3');
Query OK, 3 rows affected (0.00 sec)
Records: 3  Duplicates: 0  Warnings: 0

mysql> select * from t;
+----+--------+
| id | c1     |
+----+--------+
|  1 | zhuge1 |
|  2 | zhuge2 |
|  3 | zhuge3 |
+----+--------+
3 rows in set (0.00 sec)

mysql> delete from t where id = 3;
Query OK, 1 row affected (0.01 sec)

mysql> select * from t;
+----+--------+
| id | c1     |
+----+--------+
|  1 | zhuge1 |
|  2 | zhuge2 |
+----+--------+
2 rows in set (0.00 sec)

mysql> exit;
Bye

# 重新连接MySQL
mysql> insert into t(c1) values('zhuge4');
Query OK, 1 row affected (0.00 sec)

mysql> select * from t;  --生成的id为4，不是3
+----+--------+
| id | c1     |
+----+--------+
|  1 | zhuge1 |
|  2 | zhuge2 |
|  4 | zhuge4 |
+----+--------+
3 rows in set (0.00 sec)

10、DDL原子化?

????????InnoDB表的DDL支持事务完整性，要么成功要么回滚。

????????MySQL 8.0 开始支持原子 DDL 操作，其中与表相关的原子 DDL 只支持 InnoDB 存储引擎。一个原子 DDL 操作内容包括：更新数据字典，存储引擎层的操作，在 binlog 中记录 DDL 操作。支持与表相关的 DDL：数据库、表空间、表、索引的 CREATE、ALTER、DROP 以及 TRUNCATE TABLE。支持的其它 DDL ：存储程序、触发器、视图、UDF 的 CREATE、DROP 以及ALTER 语句。支持账户管理相关的 DDL：用户和角色的 CREATE、ALTER、DROP 以及适用的 RENAME等等。

# MySQL 5.7
mysql> show tables;
+----------------+
| Tables_in_test |
+----------------+
| account        |
| actor          |
| employee       |
| film           |
| film_actor     |
| leaf_id        |
| t1             |
| test_innodb    |
| test_myisam    |
| test_order_id  |
+----------------+
10 rows in set (0.01 sec)

//删除表报错不会回滚，t1表会被删除
mysql> drop table t1,t2;  
ERROR 1051 (42S02): Unknown table 'test.t2'
mysql> show tables;
+----------------+
| Tables_in_test |
+----------------+
| account        |
| actor          |
| employee       |
| film           |
| film_actor     |
| leaf_id        |
| test_innodb    |
| test_myisam    |
| test_order_id  |
+----------------+
9 rows in set (0.00 sec)


# MySQL 8.0  
mysql> show tables;
+----------------+
| Tables_in_test |
+----------------+
| account        |
| actor          |
| employee       |
| film           |
| film_actor     |
| leaf_id        |
| t1             |
| test_innodb    |
| test_myisam    |
| test_order_id  |
+----------------+
10 rows in set (0.00 sec)

 //删除表报错会回滚，t1表依然还在
mysql> drop table t1,t2; 
ERROR 1051 (42S02): Unknown table 'test.t2'
mysql> show tables;  
+----------------+
| Tables_in_test |
+----------------+
| account        |
| actor          |
| employee       |
| film           |
| film_actor     |
| leaf_id        |
| t1             |
| test_innodb    |
| test_myisam    |
| test_order_id  |
+----------------+
10 rows in set (0.00 sec)

文章来源:https://blog.csdn.net/Myname_China/article/details/135450015
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若内容造成侵权/违法违规/事实不符，请联系我的编程经验分享网邮箱：chenni525@qq.com进行投诉反馈，一经查实，立即删除！