RK3568笔记九: DRM显示摄像头

发布时间:2024年01月15日

若该文为原创文章,转载请注明原文出处。

一、介绍

学习DRM的目的是想做类似NVR显示多路实时流,通过勇哥(Marc)的指导,大概流程是通过Zlmedia拉流,RK3568的MPP解码,DRM显示,可以使用HDMI或DIS屏幕,所以为了后面的实现,先测试摄像头采集DRM显示。

二、移植过程

测试过程在笔记八里,如有不懂的,请看笔迹八。

移植过程参考GitHub - MontaukLaw/cvv_test

里面有DRM显示两个屏的例子。

程序是以正点原子里的rknn_yolov5_demo例程修改。主要修改几个地方。

大概流程:

1、初始化屏幕? drm_dis_init();

2、opencv打开摄像头cv::VideoCapture cap(0);

3、循环读数据并显示

cap.read(orig_img);

draw_lcd_screen_rgb_960((uint8_t *)img.data, 720 * 1280 * 3);

代码:

main.cc

// Copyright (c) 2021 by Rockchip Electronics Co., Ltd. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.

/*-------------------------------------------
                Includes
-------------------------------------------*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>
#include <dlfcn.h>
#include <vector>
#include <string>

#include "drm_func.h"
#include "rga_func.h"
#include "rknn_api.h"
#include "yolo.h"

#include "RgaUtils.h"
#include "im2d.h"
#include "opencv2/core/core.hpp"
#include "opencv2/imgcodecs.hpp"
#include "opencv2/imgproc.hpp"
#include <opencv2/opencv.hpp>
#include "rga.h"
#include <xf86drm.h>
#include <xf86drmMode.h>
#include "dev.h"
#include "bo.h"


static sp_dev *mDev;
#define OUTPUT_DEVICE_LCD 1

static drmModeConnectorPtr lcdConnectorPtr = nullptr;
static struct sp_crtc *lcdCRPtr;
static drmModeEncoderPtr lcdEncoderPtr = nullptr;
static uint32_t lcdCrtcId = 0;
static drmModeModeInfoPtr lcdModInfoPtr;


static void get_connector(uint8_t outpuDevice)
{
    int i, j = 0;
    int ret = 0;

    printf("mDev->num_connectors = %d\n", mDev->num_connectors);
    for (j = 0; j < mDev->num_connectors; j++)
    {
        // name 是分辨率信息
        printf("connector name:%d\n", j);
        printf("connector_type:%d\n", j);
        printf("connector_type_id:%d\n", j);
        printf("connector status:%d\n", j);
        // 对应不同的输出设备, 指定不同的connector跟encoder
        if (outpuDevice == OUTPUT_DEVICE_LCD)
        {
            if (mDev->connectors[j]->connector_type == DRM_MODE_CONNECTOR_DSI &&
                mDev->connectors[j]->connection == DRM_MODE_CONNECTED)
            {
                lcdConnectorPtr = mDev->connectors[j];
            }
        }
       
    }
}

static void get_encoder(uint8_t outpuDevice)
{
    int i;
    for (i = 0; i < mDev->num_encoders; i++)
    {
        if (outpuDevice == OUTPUT_DEVICE_LCD)
        {
            if (mDev->encoders[i]->encoder_type == DRM_MODE_ENCODER_DSI)
            {
                lcdEncoderPtr = mDev->encoders[i];
                lcdCrtcId = lcdEncoderPtr->crtc_id;
            }
        }
       
    }
}

static void get_crtc()
{
    int j;

    printf("lcd crtc id:%d\n", lcdCrtcId);

    for (j = 0; j < mDev->num_crtcs; j++)
    {

        printf("encoderPtr->crtc_id:%d\n", mDev->crtcs[j].crtc->crtc_id);
        printf("mode_valid:%d\n", mDev->crtcs[j].crtc->mode_valid);
        printf("mode_name:%s\n", mDev->crtcs[j].crtc->mode.name);
        if (mDev->crtcs[j].crtc->crtc_id == lcdCrtcId && mDev->crtcs[j].crtc->mode_valid)
        {
            lcdCRPtr = &mDev->crtcs[j];
        }
       
    }
}


static int init_screens()
{
    int ret = 0;
    
    // 获取lcd connector
    get_connector(OUTPUT_DEVICE_LCD);

    if (!lcdConnectorPtr)
    {
        printf("failed to get hdmi connector or encoder.\n");
        return -1;
    }

    printf("lcd connector id:%d\n", lcdConnectorPtr->connector_id);

    // 获取lcd encoder
    get_encoder(OUTPUT_DEVICE_LCD);


    if (!lcdEncoderPtr)
    {
        printf("failed to get encoder.\n");
        return -2;
    }

    printf("lcd encoder id:%d\n", lcdEncoderPtr->encoder_id);

    // 获取一下显示分辨率之类
    lcdModInfoPtr = &lcdConnectorPtr->modes[0];

    // 把connector的encoder id赋值为encoder的id
    lcdConnectorPtr->encoder_id = lcdEncoderPtr->encoder_id;

    // 获取lcd crtc
    get_crtc();
    if (!lcdCRPtr)
    {
        printf("failed to get crtc.\n");
        return -3;
    }

    if (lcdCRPtr->scanout)
    {
        printf("crtc already in use\n");
        return -4;
    }

    printf("lcd crtc id:%d\n", lcdCRPtr->crtc->crtc_id);

    // allset
    // 获取bo, 只需要输入分辨率即可.
    lcdCRPtr->scanout = create_sp_bo(mDev, lcdModInfoPtr->hdisplay, lcdModInfoPtr->vdisplay, 24, 32, DRM_FORMAT_XRGB8888, 0);
    if (!lcdCRPtr->scanout)
    {
        printf("failed to create new scanout bo\n");
        return -5;
    }


    printf("fill test color\n");

    fill_bo(lcdCRPtr->scanout, 0xff, 0xff, 0x0, 0x0);

    ret = drmModeSetCrtc(mDev->fd, lcdEncoderPtr->crtc_id, lcdCRPtr->scanout->fb_id, 0, 0, &lcdConnectorPtr->connector_id, 1, lcdModInfoPtr);
    if (ret)
    {
        printf("failed to set crtc mode ret=%d\n", ret);
        return -6;
    }
    lcdCRPtr->crtc = drmModeGetCrtc(mDev->fd, lcdCRPtr->crtc->crtc_id);
    memcpy(&lcdCRPtr->crtc->mode, lcdModInfoPtr, sizeof(*lcdModInfoPtr));

    return 0;
}



int drm_dis_init(void)
{
	 int ret = 0;
    int i = 0;
    printf("create sp dev\n");
    // 创建显示设备
    mDev = create_sp_dev();
    if (!mDev)
    {
        printf("failed to exec create_sp_dev.\n");
        return -10;
    }

    printf("init_screen\n");

    // 初始化屏幕
    ret = init_screens();
    if (ret != 0)
    {
        printf("failed to exec initialize_screens.\n");
        return -11;
    }
    return 0;
}

void draw_lcd_screen_rgb_960(uint8_t *data, uint32_t dataSize)
{
    uint32_t colIdx = 0;
    uint32_t rowIdx = 0;
    uint8_t *dataPtr = data;
    for (rowIdx = 0; rowIdx < 1280; rowIdx++)
    {
        uint8_t *rowPtr = (uint8_t *)lcdCRPtr->scanout->map_addr + rowIdx * lcdCRPtr->scanout->pitch;
        for (colIdx = 0; colIdx < 720; colIdx++)
        {
            uint8_t *pixel = rowPtr + colIdx * 4;
            pixel[0] = *dataPtr;
            dataPtr++;
            pixel[1] = *dataPtr;
            dataPtr++;
            pixel[2] = *dataPtr;
            dataPtr++;
            pixel[3] = 0xff;
        }
    }
}

int main(int argc, char **argv)
{
	int i,j;


	drm_dis_init();
	
	cv::VideoCapture cap(0);
	if (!cap.isOpened())
	{
		std::cout << "无法打开摄像头" << std::endl;
		return -1;
	}
	cap.set(cv::CAP_PROP_FRAME_WIDTH, 1280);
	cap.set(cv::CAP_PROP_FRAME_HEIGHT, 720);
	// using opencv
	using namespace cv;
	using namespace std;
	cv::Mat orig_img;
	cv::Mat img;

	char  data_u8[4];
	while(1)
	{
		cap.read(orig_img);
      		cv::rotate(orig_img, orig_img, ROTATE_90_COUNTERCLOCKWISE);
      		cv::cvtColor(orig_img, img, cv::COLOR_BGR2RGB);

	
	    draw_lcd_screen_rgb_960((uint8_t *)img.data, 720 * 1280 * 3);
	}
	
	

	exit(0);
}

这里需要注意的是显示部分

显示是32位的RGBA,所以需要封装一下,初始化得到了map_addr映射地址,直接填充数据,就会显示。

使用正点原子需要先关闭QT应用程序,不然运行一会就会退出。

CMakeLists.txt

cmake_minimum_required(VERSION 3.4.1)

project(rknn_yolov5v7x_demo)

set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS}")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -std=c++11")
set(CMAKE_SKIP_INSTALL_RPATH FALSE)
set(CMAKE_BUILD_WITH_INSTALL_RPATH TRUE)
set(CMAKE_INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib")

# rknn api
set(PLATFORM RK3566_3568)
set(LIB_ARCH aarch64)
set(RKNN_API_PATH ${CMAKE_CURRENT_SOURCE_DIR}/libs/rknpu2/runtime/RK356X/Linux/librknn_api)
set(RKNN_RT_LIB ${RKNN_API_PATH}/aarch64/librknnrt.so)
include_directories(${RKNN_API_PATH}/include)

# drm
set(DRM_DIR ${CMAKE_CURRENT_SOURCE_DIR}/libs/common/drm)
set(DRM_RT_LIB ${CMAKE_CURRENT_SOURCE_DIR}/libs/libdrm/lib/libdrm.so)
include_directories(${DRM_DIR}/include)
include_directories(${DRM_DIR}/include/libdrm)
include_directories(${CMAKE_CURRENT_SOURCE_DIR}/libs/rkdrm/)


#rga
set(RGA_PATH ${CMAKE_CURRENT_SOURCE_DIR}/libs/librga)
set(RGA_LIB ${RGA_PATH}/libs/Linux/gcc-aarch64/librga.so)
include_directories(${RGA_PATH}/include)


set(OPENCV_LIBS opencv_core opencv_flann opencv_videoio opencv_video opencv_highgui opencv_imgcodecs opencv_imgproc)
set(TOOLCHAIN_DIR /opt/atk-dlrk356x-toolchain)
set(CMAKE_C_COMPILER ${TOOLCHAIN_DIR}/usr/bin/aarch64-buildroot-linux-gnu-gcc)
set(CMAKE_CXX_COMPILER ${TOOLCHAIN_DIR}/usr/bin/aarch64-buildroot-linux-gnu-c++)
set(SYSROOT ${TOOLCHAIN_DIR}/aarch64-buildroot-linux-gnu//sysroot/usr/include)
set(CMAKE_SYSROOT ${TOOLCHAIN_DIR}/aarch64-buildroot-linux-gnu/sysroot)
include_directories(${SYSROOT})
include_directories(${SYSROOT}/opencv4)

set(CMAKE_INSTALL_RPATH "lib")


# rknn_yolo_demo
include_directories( ${CMAKE_SOURCE_DIR}/include)
add_executable(rknn_yolo_demo
        src/drm_func.c
        src/rga_func.c
        src/yolo.cc
        src/main.cc
        src/bo.cc
        src/dev.cc
        src/modeset.cc
)

target_link_libraries(rknn_yolo_demo
  ${RKNN_RT_LIB}
  ${RGA_LIB}
  ${OPENCV_LIBS}
  ${DRM_RT_LIB}
  dl
)

# install target and libraries
set(CMAKE_INSTALL_PREFIX ${CMAKE_SOURCE_DIR}/install/atk_rknn_yolo_v5_demo)
install(TARGETS rknn_yolo_demo DESTINATION ./)

install(PROGRAMS ${RKNN_RT_LIB} DESTINATION lib)
install(PROGRAMS ${RGA_LIB} DESTINATION lib)
install(DIRECTORY model DESTINATION ./)

编译后,把可执行文件上传到板子运行后,测试正常。

如有侵权,或需要完整代码,请及时联系博主。

文章来源:https://blog.csdn.net/weixin_38807927/article/details/135612302
本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。