给大家推荐一款超强进程管理工具： Supervisor
当我们需要运行某些应用 并且希望常驻进程，百度 chrom推荐你使用 nohup命令 & 、 &!、 screen命令 结果使用起来有时候会不好用 不好管理 多个进程同时维护又很麻烦等各种问题。
Supervisor ?Supervisor安装
我是centos系统 所以以此为例。
# yum install 的方式
yum install -y supervisor
Supervisor的配置
如果使用yum install -y supervisor的命令安装，会生成默认配置/etc/supervisord.conf和目录/etc/supervisord.d，如果没有则自行创建。
在/etc/supervisord.d的目录下创建conf和log两个目录，conf用于存放管理进程的配置，log用于存放管理进程的日志。
cd /etc/supervisord.d
mkdir conf log
修改/etc/supervisord.conf的[include]部分，即载入/etc/supervisord.d/conf目录下的所有配置。
vi /etc/supervisord.conf
...
[include]
files = supervisord.d/conf/*.conf
...
也可以修改supervisor应用日志的目录，默认日志路径为/var/log/supervisor/supervisord.log。
vi /etc/supervisord.conf
...
[supervisord]
logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10 ; (num of main logfile rotation backups;default 10)
loglevel=info ; (log level;default info; others: debug,warn,trace)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
...
管理应用的配置
进入到/etc/supervisord.d/conf目录，创建管理应用的配置，可以创建多个应用配置。
例如，创建项目名称.conf配置。
[program:项目名称]
directory = /usr/local/bin ; 程序的启动目录
command = python xiangmumingcheng.py ; 启动命令，与命令行启动的命令是一样的
autostart = true ; 在 supervisord 启动的时候也自动启动
startsecs = 5 ; 启动 5 秒后没有异常退出，就当作已经正常启动了
autorestart = true ; 程序异常退出后自动重启
startretries = 3 ; 启动失败自动重试次数，默认是 3
user = root ; 用哪个用户启动
redirect_stderr = true ; 把 stderr 重定向到 stdout，默认 false
stdout_logfile_maxbytes = 20MB ; stdout 日志文件大小，默认 50MB
stdout_logfile_backups = 20 ; stdout 日志文件备份数
; stdout 日志文件，需要注意当指定目录不存在时无法正常启动，所以需要手动创建目录（supervisord 会自动创建日志文件）
stdout_logfile = /etc/supervisord.d/log/confd.log ;日志统一放在log目录下
; 可以通过 environment 来添加需要的环境变量，一种常见的用法是修改 PYTHONPATH
; environment=PYTHONPATH=$PYTHONPATH:/path/to/somewhere
Surpervisor的启动
# supervisord二进制启动
supervisord -c /etc/supervisord.conf
# 检查进程
ps aux | grep supervisord
设置开机启动及systemd方式启动。
sudo chmod +x /etc/rc.d/init.d/supervisord
sudo chkconfig --add supervisord
sudo chkconfig supervisord on
sudo service supervisord start
接下来可以使用该程序 启动 守护你的进程了supervisorctl status 进程名 查看进程运行状态
supervisorctl start 进程名 启动进程没用
supervisorctl stop 进程名 关闭进程
supervisorctl restart 进程名 重启进程
supervisorctl update 重新载入配置文件 每次新增配置都需要执行该命令 配置没有改动的进程不会受影响而重启。
supervisorctl shutdown 关闭supervisord
supervisorctl clear 进程名 清空进程日志
supervisorctl 进入到交互模式下。使用help查看所有命令。
start stop restart + all 表示启动，关闭，重启所有进程。
supervisord，初始启动 Supervisord，启动、管理配置中设置的进程。
```bash
$ supervisord --help
supervisord -- run a set of applications as daemons.
Usage: /usr/bin/supervisord [options]
Options:
-c/--configuration FILENAME -- configuration file
-n/--nodaemon -- run in the foreground (same as 'nodaemon true' in config file)
-h/--help -- print this usage message and exit
-v/--version -- print supervisord version number and exit
-u/--user USER -- run supervisord as this user (or numeric uid)
-m/--umask UMASK -- use this umask for daemon subprocess (default is 022)
-d/--directory DIRECTORY -- directory to chdir to when daemonized
-l/--logfile FILENAME -- use FILENAME as logfile path
-y/--logfile_maxbytes BYTES -- use BYTES to limit the max size of logfile
-z/--logfile_backups NUM -- number of backups to keep when max bytes reached
-e/--loglevel LEVEL -- use LEVEL as log level (debug,info,warn,error,critical)
-j/--pidfile FILENAME -- write a pid file for the daemon process to FILENAME
-i/--identifier STR -- identifier used for this instance of supervisord
-q/--childlogdir DIRECTORY -- the log directory for child process logs
-k/--nocleanup -- prevent the process from performing cleanup (removal of
old automatic child log files) at startup.
-a/--minfds NUM -- the minimum number of file descriptors for start success
-t/--strip_ansi -- strip ansi escape codes from process output
--minprocs NUM -- the minimum number of processes available for start success
--profile_options OPTIONS -- run supervisord under profiler and output
results based on OPTIONS, which is a comma-sep'd
list of 'cumulative', 'calls', and/or 'callers',
e.g. 'cumulative,callers')
```
.在/etc/supervisord.conf中修改[inet_http_server]的参数，具体如下：
[inet_http_server] ; inet (TCP) server disabled by default
port=*:9001 ; ip_address:port specifier, *:port for all iface
username=root ; default is no username (open server)
password=xxxx ; default is no password (open server)
修改后重启supervisor进程，在浏览器访问 http://<host-ip>:9001。
官方地址： http://supervisord.org/
又臭又长 如果需要深入研究可以看看 不然赶紧工作吧，
; Sample supervisor config file.
[unix_http_server]
file=/var/run/supervisor/supervisor.sock ; (the path to the socket file)
;chmod=0700 ; sockef file mode (default 0700)
;chown=nobody:nogroup ; socket file uid:gid owner
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))
;[inet_http_server] ; inet (TCP) server disabled by default
;port=127.0.0.1:9001 ; (ip_address:port specifier, *:port for all iface)
;username=user ; (default is no username (open server))
;password=123 ; (default is no password (open server))
[supervisord]
logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10 ; (num of main logfile rotation backups;default 10)
loglevel=info ; (log level;default info; others: debug,warn,trace)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false ; (start in foreground if true;default false)
minfds=1024 ; (min. avail startup file descriptors;default 1024)
minprocs=200 ; (min. avail process descriptors;default 200)
;umask=022 ; (process file creation umask;default 022)
;user=chrism ; (default is current user, required if root)
;identifier=supervisor ; (supervisord identifier, default is 'supervisor')
;directory=/tmp ; (default is not to cd during start)
;nocleanup=true ; (don't clean up tempfiles at start;default false)
;childlogdir=/tmp ; ('AUTO' child log dir, default $TEMP)
;environment=KEY=value ; (key value pairs to add to environment)
;strip_ansi=false ; (strip ansi escape codes in logs; def. false)
; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface
[supervisorctl]
serverurl=unix:///var/run/supervisor/supervisor.sock ; use a unix:// URL for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris ; should be same as http_username if set
;password=123 ; should be same as http_password if set
;prompt=mysupervisor ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history ; use readline history if available
; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.
;[program:theprogramname]
;command=/bin/cat ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=999 ; the relative start priority (default 999)
;autostart=true ; start at supervisord start (default: true)
;autorestart=true ; retstart at unexpected quit (default: true)
;startsecs=10 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10 ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB ; number of bytes in 'capturemode' (default 0)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A=1,B=2 ; process environment additions (def no adds)
;serverurl=AUTO ; override serverurl computation (childutils)
; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more 'real'
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.
;[eventlistener:theeventlistenername]
;command=/bin/eventlistener ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1 ; number of processes copies to start (def 1)
;events=EVENT ; event notif. types to subscribe to (req'd)
;buffer_size=10 ; event buffer queue size (default 10)
;directory=/tmp ; directory to cwd to before exec (def no cwd)
;umask=022 ; umask for process (default None)
;priority=-1 ; the relative start priority (default -1)
;autostart=true ; start at supervisord start (default: true)
;autorestart=unexpected ; restart at unexpected quit (default: unexpected)
;startsecs=10 ; number of secs prog must stay running (def. 1)
;startretries=3 ; max # of serial start failures (default 3)
;exitcodes=0,2 ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT ; signal used to kill process (default TERM)
;stopwaitsecs=10 ; max num secs to wait b4 SIGKILL (default 10)
;user=chrism ; setuid to this UNIX account to run the program
;redirect_stderr=true ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10 ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false ; emit events on stdout writes (default false)
;stderr_logfile=/a/path ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false ; emit events on stderr writes (default false)
;environment=A=1,B=2 ; process environment additions
;serverurl=AUTO ; override serverurl computation (childutils)
; The below sample group section shows all possible group values,
; create one or more 'real' group: sections to create "heterogeneous"
; process groups.
;[group:thegroupname]
;programs=progname1,progname2 ; each refers to 'x' in [program:x] definitions
;priority=999 ; the relative start priority (default 999)
; The [include] section can just contain the "files" setting. This
; setting can list multiple files (separated by whitespace or
; newlines). It can also contain wildcards. The filenames are
; interpreted as relative to this file. Included files *cannot*
; include files themselves.
[include]
files = supervisord.d/conf/*.conf