CK_Label_V9 System Developer‘s Manual
Roadway Lights Registration
Place the magnet near the area of the barcode to trigger the Roadway Lights register to the system
Registration success: red light to green light, and then turn off.
Query Roadway Lights Information
Introduction to the API：
Query Roadway Lightss information
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | http://localhost/wms/associate/queryIndicates |
| Request Method | GET/POST |
| Content-Type | multipart/form-data |
Request parameters：
Parameter Description：
| Attributes | Value | Required | Comment |
|---|---|---|---|
| Body transmits the collection of router ids [1828,1829], and query all if you sendd the blank [] |
Request example
| [1828] |
|---|
Response parameters：
| Attributes | Value | Types | Comment |
|---|---|---|---|
| mac | "99.97.36.55" | string | Tag mac/Tag ID |
| hardwareVersion | "5.1" | string | Hardware version |
| manufacture | CWR000001 | string | ID of BindRouter |
| productionBatch | 22-05-06 | int | Signal strength (-100 ~ 0) |
| routerId | 1828 | int | ID of BindRouter |
| rssi | -14 | int | Signal strength (-100 ~ 0) |
| screenType | 0 | int | No use |
| serialNumber | "CNSHZH23125" | string | No use |
| softwareVersion | "1.5" | string | Software version |
| state | true | bool | No use |
| status | 1 | int | Status of Tags |
Response example：
| { "datalist": [ { "hardwareVersion": "5.1", "mac": "99.88.06.83", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.89.19.44", "manufacture": "CoreWind0", "productionBatch": "20-09-09", "routerId": 1828, "rssi": -15, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.4", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.88.06.86", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 } ], "resultCode": 10, "resultMsg": "success"} |
|---|
| { "datalist": [ { "hardwareVersion": "5.1", "mac": "99.88.06.83", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.89.19.44", "manufacture": "CoreWind0", "productionBatch": "20-09-09", "routerId": 1828, "rssi": -15, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.4", "state": true, "status": 1 }, { "hardwareVersion": "5.1", "mac": "99.88.06.86", "manufacture": "CoreWind1", "productionBatch": "22-05-06", "routerId": 1828, "rssi": -14, "screenType": 0, "serialNumber": "CNSHZH23125", "softwareVersion": "1.5", "state": true, "status": 1 } ], "resultCode": 10, "resultMsg": "success"} |
Light Roadway Lights
Introduction to the API：
Light Roadway Lights all PTL tags information
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | http://localhost/wms/associate/ctrlShelfIndicator |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| Attributes | Types | Required | Comment |
|---|---|---|---|
| mac | string | yes | Tag mac / Tag ID |
| timeout | int | yes | Lighting timeout time(s);0 : never turn offn : turn off autoAutomatically after n seconds |
| ledrgb | string | yes | red：ff0000; red Led Ongreen：ff00；green Led Onyellow：ffff00; yellow Led On |
| ledmode | int | Yes | lightint mode;0, always on1, quick flash2, slow flash3, turn of the light according ledrgb4. turn off the lights all |
| buzzer | int | yes | 0：Buzzer off，1：Buzzer on |
| reserve | string | optional | reserve |
Raw example：
| [{"mac":"99.29.03.13","timeout":0,"ledrgb":"ffff00","ledmode":0,"buzzer":0,"cmdtoken":"123456","reserve":"reserve"},{"mac":"99.29.05.33","timeout":0,"ledrgb":"ff00ff","ledmode":0,"buzzer":0,"cmdtoken":"123456","reserve":"reserve"}] |
|---|
Response example：
| true |
|---|
Callback of Light Roadway Lights Result
Introduction to the API：
Notification the result of Light Roadway Lights
Basic Information：
| Attributes | 接口信息 |
|---|---|
| Status | Finished |
| URL | URL of user's callback API |
| Request Method | POST |
| Content-Type | application/json |
Request parameters：
Parameter Description：
| parameter name | example value | Type | Parameter Description |
|---|---|---|---|
| mac | 99.99.08.51 | string | Tag ID |
| power | 100 | int | surplus power（0~100） |
| result | true | bool | true: Light onfalse:Light failed |
| lednum | 1 | int | Led num |
| cmdtoken | string | ||
| message | 数据成功 | string | 数据成功；(send ok)数据失败；(send failed)数据发送超时；(send timeout)唤醒失败；(wake up failed)基站不在线；(router offline)数据异常；(Abnormal data)数据格式不正确，解析失败；(incorrect data format)参数格式不正确或参数不全;(Missing required parameters)无法执行;(Unable to execute)标签不存在；(Tag does not exist) |
Parameters example：
| {"mac":"99.99.08.51","result":true,"power":100,"lednum":1,"cmdtoken":"55555","message":"数据成功"} |
|---|
Setting URL of user's callback API
Login wms system with admin user，go to “System Information”->“Third-party configuration”，you can config the Callback URL here:
| 反馈类型 | 描述 | 地址 |
|---|---|---|
| Callback of Light Leds Result | ctrlShelfIndicatorResult | URL of user's callback API(CK_Label_V9) |
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。 如若内容造成侵权/违法违规/事实不符，请联系我的编程经验分享网邮箱：chenni525@qq.com进行投诉反馈，一经查实，立即删除！